Epson projection lenses

Epson CB-510U replacement lens

Epson CB-510U replacement lens
Throw ratio: 0.5:1 0.65:1 0.7:1 0.8:1
Support Epson (epson) model: CB-L610 CB-L610W CB-L610U CB-L510U
Epson CB-510U replacement lens

  • Size: 0.67 inches (D10, C2fine)
    Drive mode: polysilicon TFT active matrix
    Number of pixels: 2,304,000 dots (1920 x 1200) x 3
    Actual resolution: WUXGA
    Aspect ratio: 16:10
    Refresh rate: 193Hz-240Hz
    Type: optical zoom (manual) / focus (manual)
    F-value: 1.5-1.7
    Focal length: 20.0mm-31.8mm
    Zoom ratio: 1-1.6
    Lens shift: Vertical: -50% to +50% (centered horizontally) Horizontal: -20% to +20% (centered vertically) (manual)
    light source
    Type: Laser Diode
    LD input power: 205W (lighting mode: standard, ambient temperature: 25℃)
    Light source life* 1:20,000 hours (light mode: standard / quiet) 30,000 hours (lamp mode: extended)



   Projection ratio: distance from lens to picture divided by picture width


   9 brightness uniformity: 9 points average brightness divided by the highest brightness


   Light attenuation ratio of uniform brightness at 9 points of the standard mirror: average brightness at 9 points of the lens divided by average brightness at 9 points of the standard mirro

LE DU Lens Unit User’s Manual
(镜头部件 用户手册)
Do not give a shock or excessive load to the projector or the lens components as the projector and lens components contain precision parts.
When shipping the projector with the lens,remove the lens before shipping the projector. The lens and the lens shift mechanism may encounter damage caused byimproper handling during transportation.
Before removing or installing the lens, be sure to turn off the projecttor, wait until the cooling fans stop, andunplug the power cord.
Do not touch the lens surface when removing or installing the lens.
Keep fingerpeints, dust or oil off the lens surface. Do not scratching.
Work on a level surface with a soft cloth under it toavoid scratching.
When using the lens unit, set the lens shift adjustment to the center of the screen.
Adjustment to the lens shift adjustment to the position other than the above can cause the edges of the image to become dark or can cause some shadows.




Welcome to LEDU lens
Welcome to the world's largest alternative lenses supplier. We focus on professional projector lenses with a throw ratio of 0.3-9:1. Welcome to leave your contact method and we will contact you as soon as possible.